TECNA 2102N Spot Bench Welder — 20 kVA Air-Operated Single-Phase AC

TECNA 2102N spot bench welder — 20 kVA, air-operated, single-phase AC. Maximum welding current of 15,200 amps, maximum electrode force of 420 lbs, and maximum electrode throat depth of 11.02 in. Standard TE550 microprocessor control.

Description

The TECNA 2102N pairs a 20 kVA single-phase AC transformer with air-operated actuation in a spot bench welder configuration. The 2102N provides a maximum welding current of 15,200 amps, a maximum electrode force of 420 lbs, and a maximum electrode throat depth of 11.02 in. The thermal current rating at 100% duty cycle is 3,500 amps. A water-cooled transformer, electrode holders, and electrodes support extended duty cycles, with epoxy resin-coated windings for long service life. The standard TE550 microprocessor weld control is included. Within the 16-25 kVA AC bench range, the 2102N pairs a 20 kVA rating with the same 11.02-in. electrode throat as the 2101D, providing additional welding power at equivalent reach.

Features

  • Standard TE550 microprocessor weld control.
  • Maximum welding current of 15,200 amps with maximum electrode force of 420 lbs.
  • Spot bench welder configuration with water-cooled transformer, electrode holders, and electrodes.
  • Two-stage electric foot control for clamping and welding; two-hand safety control available on request.
  • Built-in compressed air filter unit; lubrication-free pneumatic components eliminate oil mist.
  • Flow-switch halts the machine if cooling water flow is interrupted.

Installation Requirements

  • Water cooling: 2.7 L/min flow at 2.5 bar minimum pressure.
  • Net weight: 179 lbs. Sound level 69 dB(A). Insulation class F.

Additional information

Weight 179 lbs
Configuration

Spot

Standard Control Unit

TE101

Nominal Power 50% (kVA)

20

Max Welding Power (kVA)

60

Max Welding Current (A)

19000

Max Weld Curr Alum (kA)

17.4

Max Weld Curr Steel (kA)

15.2

Thermal Current 100% (A)

3500

No-Load Secondary Voltage (V)

4

Supply

440 V / 60 Hz

Mains Cable (L=30m, 380–415 V)

0.02 in² (16 mm²)

Delayed Fuses (380–415 V)

40 A

Arm Ø

1.42 in. (36 mm)

Electrode-Holder Ø

0.75 in. (19 mm)

Electrode Taper Ø

0.50 in. (12.7 mm)

Min Gap

4.65 in. (118 mm)

Max Gap

4.65 in. (118 mm)

Min Throat Depth

6.30 in. (160 mm)

Max Electrode Force

420 lbs (187 daN)

Max Elec Force 6 bar (Std)

420 lbs (187 daN)

Electrode Stroke

1.97 in. (50 mm)

Compressed Air (Min/Max)

94–145 psi (6.5–10 bar)

Air Consump /1000 (Std 20mm)

53 ft³ (1.5 Nm³)

Air Consump /1000 (Max)

78 ft³ (2.2 Nm³)

Air Supply Hose Ø

0.31 in. (8 mm)

Water Cooling Flow

0.71 gpm (2.7 lpm)

Aerial Noise

69 dB(A)

Power Supply

Actuator Type

Product Type