TECNA 8006D press-type spot welder — 80 kVA, air-operated, single-phase AC. Maximum welding current on steel of 13,600 amps with 1,056 lbs of electrode force at 6 bar. Electrode throat depth of 31.5 in.
The TECNA 8006D pairs a 80 kVA single-phase AC transformer with air-operated actuation in a press-type spot welder configuration. The 8006D provides a maximum welding current of 13,600 amps on steel with maximum electrode force of 1,056 lbs at 6 bar. The thermal current rating at 100% duty cycle is 5,900 amps. A water-cooled transformer, electrode holders, and electrodes support extended duty cycles, with epoxy resin-coated windings for long service life. The 8006D offers an electrode throat depth of 31.5 in.
| Weight | 959 lbs |
|---|---|
| Configuration | Spot |
| Standard Control Unit | TE550 |
| Nominal Power 50% (kVA) | 80 |
| Max Welding Power (kVA) | 115 |
| Max Welding Current (A) | 17000 |
| Max Weld Curr Alum (kA) | 15.4 |
| Max Weld Curr Steel (kA) | 13.6 |
| Thermal Current 100% (A) | 6800 |
| No-Load Secondary Voltage (V) | 8.3 / 7.5 / 6.7 / 6.1 |
| Supply | 400 V / 50 Hz |
| Mains Cable (L=30m, 380–415 V) | 0.11 in² (70 mm²) |
| Delayed Fuses (380–415 V) | 150 A |
| Min Gap | 7.48 in. (190 mm) |
| Max Gap | 17.32 in. (440 mm) |
| Throat Depth (L) | 31.50 in. (800 mm) |
| Max Electrode Force | 1056 lbs (470 daN) |
| Max Electrode Force @ 1 bar | 177 lbs (79 daN) |
| Max Elec Force 6 bar (Std) | 1056 lbs (470 daN) |
| Max Electrode Stroke | 3.15 in. (80 mm) |
| Double Stroke (Standard) | 2.36 in. (60 mm) |
| Compressed Air | 94 psi (6.5 bar) |
| Air Consump /1000 (Std 20mm) | 92 ft³ (2.6 Nm³) |
| Air Consump /1000 (Max) | 307 ft³ (8.7 Nm³) |
| Air Supply Hose Ø | 0.47 in. (12 mm) |
| Water Cooling Flow | 1.32 gpm (5 lpm) |
| Aerial Noise | 76 dB(A) |
| Electrode-Holder Ø | 1.26 in. (32 mm) |
| Electrode Taper Ø | 0.75 in. (19.05 mm) |
| Power Supply | |
| Actuator Type | |
| Product Type |
