TECNA 6022FA press-type spot welder — 40 kVA, air-operated, MFDC / inverter. Maximum short-circuit current of 19,000 amps with 1,056 lbs of electrode force at minimum throat depth. The FA variant ships with the TE700 microprocessor control unit (upgraded from the standard TE751).
The TECNA 6022FA pairs a 40 kVA medium-frequency DC (MFDC / inverter) transformer with air-operated, linear-action actuation in a press-type spot welder configuration. The 6022FA provides a maximum welding power of 85 kVA and a maximum short-circuit current of 19,000 amps. Maximum electrode force is 1,056 lbs at its 15.75 in. throat depth, with a 2.36 in. (60 mm) double stroke. The FA variant designation indicates this welder ships with the TE700 microprocessor weld control in place of the standard TE751 found on the F variant. MFDC inverter technology offers significant advantages over single-phase AC, including faster weld cycles, balanced three-phase mains loading, lower energy consumption, and improved weld quality on coated and dissimilar materials. A water-cooled transformer, electrode holders, and electrodes support extended duty cycles.
| Weight | 408 lbs |
|---|---|
| Configuration | Press Type |
| Standard Control Unit | TE700 |
| Nominal Power 50% (kVA) | 40 |
| Max Welding Power (kVA) | 85 |
| No-Load Secondary Voltage (V) | 6.1 |
| Max Short Circuit Current (kA) | 19 |
| Thermal Current 100% (kA) | 4 |
| Max Weld Curr Alum (kA) | 17.1 |
| Max Weld Curr Steel (kA) | 15.2 |
| Supply | 400 V / 50 Hz |
| Delayed Fuses (380–415 V) | 40 A |
| Mains Cable (L=30m, 380–415 V) | 0.02 in² (16 mm²) |
| Insulation Class | F |
| Compressed Air (Min/Max) | 94–145 psi (6.5–10 bar) |
| Air Consumption /1000 Spots | 307–92 ft³ (8.7–2.6 Nm³) |
| Throat Depth | 15.75 in. (400 mm) |
| Max Electrode Force | 1056 lbs (470 daN) |
| Electrode Stroke | 0.20–3.15 in. (5–80 mm) |
| Double Stroke | 2.36 in. (60 mm) |
| Water Cooling Flow | 1.59 gpm (6 lpm) |
| Min/Max Water Pressure | 36–58 psi (2.5–4 bar) |
| Aerial Noise | 70+ dB(A) |
| Arm Ø | 1.97 in. (50 mm) |
| Electrode-Holder Ø | 0.98 in. (25 mm) |
| Electrode Taper Ø | 0.58 in. (14.8 mm) |
| Power Supply | |
| Actuator Type | |
| Product Type |
