TECNA 2133D spot bench welder — 80 kVA, air-operated, single-phase AC. Maximum welding current of 32,000 amps, maximum electrode force of 1,654 lbs, and maximum electrode throat depth of 11.02 in. Standard TE550 microprocessor control.
The TECNA 2133D pairs a 80 kVA single-phase AC transformer with air-operated actuation in a spot bench welder configuration. The 2133D provides a maximum welding current of 32,000 amps, a maximum electrode force of 1,654 lbs, and a maximum electrode throat depth of 11.02 in. The thermal current rating at 100% duty cycle is 6,800 amps. A water-cooled transformer, electrode holders, and electrodes support extended duty cycles, with epoxy resin-coated windings for long service life. The standard TE550 microprocessor weld control is included. Within the 63-150 kVA AC bench range, the 2133D provides 80 kVA in a spot configuration; its projection counterpart at the same power class is the 2134D, which provides a 9.06-in. projection plate throat instead of the 2133D’s 11.02-in. electrode throat.
| Weight | 672 lbs |
|---|---|
| Configuration | Spot |
| Standard Control Unit | TE550 |
| Nominal Power 50% (kVA) | 80 |
| Max Welding Power (kVA) | 255 |
| Max Welding Current (A) | 38000 |
| Max Weld Curr Alum (kA) | 34.5 |
| Max Weld Curr Steel (kA) | 30.4 |
| Thermal Current 100% (A) | 6800 |
| No-Load Secondary Voltage (V) | 8.3 / 7.5 / 6.7 / 6.1 |
| Supply | 440 V / 60 Hz |
| Mains Cable (L=30m, 380–415 V) | 0.11 in² (70 mm²) |
| Delayed Fuses (380–415 V) | 160 A |
| Arm Ø | 1.93 in. (49 mm) |
| Electrode-Holder Ø | 1.26 in. (32 mm) |
| Electrode Taper Ø | 0.75 in. (19.05 mm) |
| Min Gap | 6.30 in. (160 mm) |
| Max Gap | 14.17 in. (360 mm) |
| Min Throat Depth | 11.02 in. (280 mm) |
| Max Electrode Force | 1654 lbs (736 daN) |
| Max Elec Force 6 bar (Std) | 1654 lbs (736 daN) |
| Electrode Stroke | 3.94 in. (100 mm) |
| Double Stroke (Standard) | 2.36 in. (60 mm) |
| Adj Double Stroke (2184–2185) | 0.00–3.15 in. (0–80 mm) |
| Compressed Air (Min/Max) | 94–145 psi (6.5–10 bar) |
| Air Consump /1000 (Std 20mm) | 162 ft³ (4.6 Nm³) |
| Air Consump /1000 (Max) | 544 ft³ (15.4 Nm³) |
| Air Supply Hose Ø | 0.59 in. (15 mm) |
| Water Cooling Flow | 2.11 gpm (8 lpm) |
| Aerial Noise | 74 dB(A) |
| Power Supply | |
| Actuator Type | |
| Product Type |
